Machine à vendre

Nos machines à vendre :

Dérouleurs double torsions et à détorsion ARD630 (2X) :

A1) Description technique.

A2) Puissances motorisation.

Dérouleur tangentiel ARH 630.1.3.L

B1) Description technique.

C) Double torsion DSI631 :

C1) Description technique.

C2) Puissances motorisation.

FOLKE & SANDELIN Vertical Lead Extruder, Model 4

Supply of one lead extrusion line with following main characteristics:

Factory facilities will comply with following data:

1.1. Heavy duty reducer size No. 4 with vertical thrust bearing

Heavy duty gearbox type N°4, including vertical thrust bearing, oil lubrication piping and safety coupling for connection to main motor. The gearbox is mounted on a base frame which is of a heavy steel construction. This base frame integrates the driving motor fixation and supports the pumps and heat exchangers of the oil lubrication circuits.

1.2. Screw housing thermo regulated & heat proofed

1 screw housing type 4, with heating elements, insulation and inlet pipe. The screw-housing is manufactured from two main components, the body and the liner. The liner is machined with U-shaped grooves to grip the lead during extrusion. The inner surface is hard chromium plated. Within the body are helical drilled channels for cooling and outside a helical machined groove for the heaters. The heating is divided in 2 zones and the cooling in three cooling circuits.

1.3. Cooling trough

One cooling trough, placed just at the outlet of the die block, allows a quick cooling of the lead sheathed cable. It is equipped with guiding rollers and one hand valve for emulsion output adjustment.

2.1. 11” Die block

The 11” die block is designed for cable diameter of 10-110 mm over lead ,provided on 1995. The unit consists of die block body, hydraulic adjusting device, tool ejector and accessories. The heating of the die block is divided in two zones. To facilitate centring, each of the four centering screws is equipped with a torque multiplier. The die block is delivered with heat protective covers. The die block includes a cooling system for the hydraulic adjusting device and one for the die cooling.

2.2. Set of extrusion tools (tip and die)

One set of extrusion tools for different sizes is delivered with the die block. The tools are made of alloyed steel, hardened to 52-55 HRc.

3.1. control panel

The control original control panel is present.

3.2. Main DC motor

The main motor 40KW DC motor can be Refurbished, with forced ventilation and tacho generator for speed control. The motor is fixed on the main base frame with the gearbox.

4. Cooling system

Original cooling system Folk & Sandelin is present.

5.Melting Pots

6.1. control panel

The control panel can be provided as follow :
The connection of power supply is foreseen from bottom (power supply from top is available on request).

7. Cooling system reconditioned

It includes:

Gearbox oil lubricating system consist of:

Screw housing cooling system consist of:
Emulsion system for die and cable cooling consist of:

Piping for connections of cooling water feed and drain
from/to factory chilling unit in one point only.

All connections to machine are made through quickconnecting
system.

Anne Sauvage

Responsable administrative

Philippe Sauvage

Responsable de la production

Marc Sauvage

Responsable commercial