Machine à vendre

Nos machines à vendre :

Dérouleurs double torsions et à détorsion ARD630 (2X) :

A1) Description technique.

Type de machine : ARD630.1. D
Matière : Cuivre.
Force : 250 N/mm2
Diamètre fil: 3 mm
Vitesse Max: 500-3200 pas/min
Pas : 60-300mm
Sens : Gauche/Droite S/Z.
Taux de détorsion 0-100%
Dimension tète de câblage . 13x15mm
Tension déroulement : 8 N
Diam Max joue Bobine 500 mm
Diamètre fut. 250 mm
Largeur Bobine 375 mm

A2) Puissances motorisation.

Dérouleur tangentiel ARH 630.1.3.L

B1) Description technique.

Type de machine : ARH630.1.3. L
Nombre de point de déroulement. 1
Vitesse de production. 300 m/min
Diam max Bobine. 630mm.
Diam Min Bobine. 400mm.
Diamètre Min Fut. 224 mm
Alésage pointe. 100 mm
Larg. Max bobine : 475 mm.
Poids Max bobine. 650 kg.
Puissance motorisation. 1.5 kw

C) Double torsion DSI631 :

C1) Description technique.

Type de machine : DSI631.1
Matière utilisée. Cuivre isolé.
Diamètre fil unitaire. 4.2
Diam câble. 8.5 mm
Vitesse production. 300 m/min
Vitesse de rotation lyre. 4000 pas/min.
Gamme de pas. 6-180 mm.
Sens du pas. S ou Z gauche/droite.
Dimensions tète de câblage 13x15mm
Tension enroulement : 540 N
Diam Max joue Bobine 630 mm
Diam Min joue Bobine 500 mm
Diamètre fut. 224 mm
Largeur Bobine 375 mm

C2) Puissances motorisation.

FOLKE & SANDELIN Vertical Lead Extruder, Model 4

Supply of one lead extrusion line with following main characteristics:

Cable size range: min. 10 mm up to max. 110 mm over lead sheath
Extruder type: No. 4
Position: vertical
Drive: variable speed 40 kW DC motor
Die block size: 11”
Lead Melting pots: Can be included (see bellow)
Lead output: max. 32/35 kg/min.
Lead type: Pure lead (99.99%) or lead alloy (type to be confirmed by Customer)
Pay-off reel diameter: Not included
Take-up reel diameter: Not included

Factory facilities will comply with following data:

Power supply: 3 x 400 V +/- 5%
Frequency: 50 Hz
Control voltage: 230 VAC + 24 VDC
Air network pressure: 6 bars
Water pressure: 4 bars
Water temperature: 25°C maximum.

1.1. Heavy duty reducer size No. 4 with vertical thrust bearing

Heavy duty gearbox type N°4, including vertical thrust bearing, oil lubrication piping and safety coupling for connection to main motor. The gearbox is mounted on a base frame which is of a heavy steel construction. This base frame integrates the driving motor fixation and supports the pumps and heat exchangers of the oil lubrication circuits.

1.2. Screw housing thermo regulated & heat proofed

1 screw housing type 4, with heating elements, insulation and inlet pipe. The screw-housing is manufactured from two main components, the body and the liner. The liner is machined with U-shaped grooves to grip the lead during extrusion. The inner surface is hard chromium plated. Within the body are helical drilled channels for cooling and outside a helical machined groove for the heaters. The heating is divided in 2 zones and the cooling in three cooling circuits.

1.3. Cooling trough

One cooling trough, placed just at the outlet of the die block, allows a quick cooling of the lead sheathed cable. It is equipped with guiding rollers and one hand valve for emulsion output adjustment.

2.1. 11” Die block

The 11” die block is designed for cable diameter of 10-110 mm over lead ,provided on 1995. The unit consists of die block body, hydraulic adjusting device, tool ejector and accessories. The heating of the die block is divided in two zones. To facilitate centring, each of the four centering screws is equipped with a torque multiplier. The die block is delivered with heat protective covers. The die block includes a cooling system for the hydraulic adjusting device and one for the die cooling.

2.2. Set of extrusion tools (tip and die)

One set of extrusion tools for different sizes is delivered with the die block. The tools are made of alloyed steel, hardened to 52-55 HRc.

3.1. control panel

The control original control panel is present.

3.2. Main DC motor

The main motor 40KW DC motor can be Refurbished, with forced ventilation and tacho generator for speed control. The motor is fixed on the main base frame with the gearbox.